- Conforms to ISO 3930.
- NDIR technology.
- Engine RPM measurement facility.
- 7 Segment LED display.
- Automatic condensate discharge
- Automatic zero calibration.
- Digital span calibration.
- RS232C serial port for PC interface.
- NOx measurement.
- Engine oil temperature measurement.
- Portable light weight design.
- DC operation suitable for “Road tests” using vehicle battery.
- Display of Lambda / AFR / PEF.
- Petrol / CNG / LPG selection.
- Indication for Low / High flow.
- Indication for battery Low / High voltage.
- Electronic leak check facility.
- Gas scrubber for cleaning of impure particles.
- HC residue test.
ECO GAS 100
| Measurement parameters | Range | Resolution |
|---|---|---|
| CO (Carban Monoxide) | 0 - 15% | 0.01% |
| CO2 (Carbon Dioxide) | 0 - 19.9% | 0.01% |
| HC(Hydro Carbon) | 0 - 20000 PPM | 1 PPM |
| O2 (Oxygen) | 0 - 25% | 0.01% |
| NOx (Oxides of Nitrogen) | 0 - 5000 PPM | 1 PPM |
| AFR | 0 - 30% | 0.01% |
| Lambda | 0.20 to 2.00 | 0.001 |
| Engine RPM (Battery based) | 400 to 9990 RPM | 10 RPM |
| Engine Oil temperature | 0 - 150°C | 1°C |
| Operating temperature | +5°C to +45°C | |
| Measuring gas intake | 3 Litres/minute | |
| Leak test | Electronic | |
| Condensate discharge | Automatic | |
| Response | < 15 Sec.(for Sample probe length of 3m) | |
| Warm-up time @25°C & above | < 3 minute | |
| Zero calibration | Automatic | |
| Span calibration | Digital | |
| Power Supply | 12V DC ±2V battery 100-265V AC, Single phase, 50-60Hz | |
| Power | 25W | |
Sampling probe assembly
Inductive pickup & cable assembly
Battery cable (for DC operation & Engine RPM measurement)
Gas scrubber kit
Universal probe adapter kit for 2&3 wheelers
Oil temperature probe
smoke test software & RS232 Interface cable
NOx sensor
Battery based RPM measurement
Thermal Printer
